Remote Control - Kalor SLIM IDRO 16 Manual Del Usuario

• The plug of the device power cable must be
connected only after installation and assembly
of the device and must remain accessible after
installation, if the unit is not provided of a double-
pole switch suitable and accessible;
• Do not lay objects, glasses, infusers, room
perfumers on the thermostove, they could be
damaged or to damage the thermostove (in this
case de warranty does not respond);

Remote Control

The remote control (Fig. 3) used to adjust water
temperature power and the on/off functions for
the pellet stove.
To start the thermostove, press key and the
stove will automatically enter the starting phase.
Press keys + (1) and - (2) to adjust temperature,
and use keys + (6) and - (5) to adjust operating
power.
To turn off the thermostove, hold down key .
To replace the 3 volt battery located on the back
of the remote control, pull the centre of the cover
and the lever on the side of the same, replace
Fig. 3 Fig. 4
the battery observing the correct polarity (Fig. 4)
58