Maintenance And Cleaning - Kalor SLIM IDRO 16 Manual Del Usuario

Maintenance and cleaning

All cleaning of all parts must be carried out with the Thermostove completely
cold and unplugged to avoid burns and thermal shock. The Thermostove does
not need much maintenance if used with certi ed quality pellet. The need for
maintenance varies depending on the conditions of use (switching on and off
repeatedly) and depending on the performance required.
periodic monitoring of the Thermostove to check its condition.
Parts
Brazier
Cleaning the ash collection
compartment with suction device
Cleaning ash tray
Door and glass cleaning
Exchanger (turbulators)
Flame beater
Cleaning the interior heat exchanger /
smoke fan compartment
Cleaning complete exchanger
Clean "T" to exhaust
Flue
Door gasket ash
Internal parts
Flue pipe
Circulation pump
Plate heat exchanger
Hydraulic components
Electromechanical components
◊ by the user / • by the authorised quali ed technical assistance
BY THE USER
Daily control
The Thermostove requires a simple and
thorough cleaning in order to ensure a more
ef cient performance and smooth operation.
While cleaning the inside of the Thermostove,
to prevent the escape of ashes, you can start
the fan ue exhaust. To enable this feature, you
must press the button
shows "PU L S TU F" (cleaning Thermostove). To
stop the fan, simply press and hold the button
or wait for completion of a cleaning cycle (255
seconds). Clean the grate using the appropriate
tool from the ash and any incrustation which
could obstruct the passage of air. In the case of
depletion of pellets in the tank may accumulate
unburned pellets in the burn pot. Always empty
the residuals from the grate before each start.
Every 2-3
Everyday
days
◊
◊
◊
◊
◊
◊
and then The display
.
Every Every 15 Every 30
week days
Remember that only a brazier located and
clean properly can ensure ignition and optimal
operation of your Thermostove. When positioning
the crucible, carefully check that the ends of the
pads completely adhere to their home and that
the hole with pipe dedicated to the passage
It is recommended
Every 60- Every 1
days 90 days year
•
•
•
•
•
•
•
•
•
•
•
95