Alarm Setting; Function Keys - Technoline WT 188 Manual De Instrucciones

year.
Press the TIME key again and the "dash" between "date" and "month" will start flashing, press ▲
5.
or ▼ key to shift the position of "date" and "month".
Press the TIME key again and the "month" digits will start flashing, press the ▲ or ▼ key to
6.
adjust the month.
Press the TIME key again and the "date" digits will start flashing, press the ▲ or ▼ key to adjust
7.
the date.
Press the TIME key again and then press the ▲ or ▼ key to set the time zone, e.g. when the
8.
country time is faster than DCF time for 1 hour, the zone should be set to +1.
Press the TIME key again and then press the ▲ or ▼ key to choose the language for the Day of
9.
week.
10. Press the TIME key again to return to normal display.

ALARM SETTING:

1. Press the ALARM ON/OFF key.
Press and hold the ALARM key for 3 seconds and the "minute" digits of alarm time will start
2.
flashing, press ▲ or ▼ key to adjust the minute.
Press the ALARM key again and the "hour" digits of alarm time will start flashing, press ▲ or ▼
3.
key to adjust the hour.
4. Press the ALARM key again to return to alarm time display.
5. Press the ALARM ON/OFF key once to activate alarm on function and twice to activate snooze
function. Press the ALARM ON/OFF key once more, the alarm on function will be inactivated.
6. Press TIME key to return to normal display mode.

FUNCTION KEYS

SNOOZE/LIGHT KEY
-When the snooze alarm beeps, press the SNOOZE/LIGHT key to pause the alarm for 5 minutes and
the snooze function can be used repeatedly.
To stop snooze function, just press other keys once.
-Press the SNOOZE/LIGHT key to illuminate the LCD for 3 seconds.
C/F KEY
-In normal time display, press the C/F key to toggle between Celsius and Fahrenheit temperature
readings.
12/24 KEY
-In normal time display, press the 12/24 key to toggle between 12h and 24h display.
WAVE KEY
-In normal time display, press and hold the WAVE key for 3 seconds to activate the DCF scanning
function.
GB 2