Technical Specifications; Dimensions (Mm) - Robur 8135 Instrucciones

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
DESCRIPTION OF THE CLAMP
The accessory is designed to lift, rotate, overturn and move metal sheeting and other metal components such as beams, profiles,
tubular components, etc.
It is normally connected to a lifting sling (chain, wire rope or textile) by means of hooks, connecting links, shackles or other con-
necting devices.
It is built using high quality materials and is of compact, lightweight, easy to handle design. It is portable and easy to install. It has
a safety spring which guarantees that the cam is permanently in contact with the sheet to be lifted.
The reset lever enables the sheet to be clamped securely even when there is no traction.
The knurled cam locking simplifies the positioning of the sheet in the housing and the metal tip to the cam guarantees secure
tightening and greater safety during use.
The tightening force is increased by the load weight due to the eccentric geometry at the start of traction.

TECHNICAL SPECIFICATIONS

The accessory can be used to lift metal sheeting or other metal components with a maximum surface hardness of 30 HRC (300 HB).
max Opening A
WLL (kg) (mm)
0,75 0-15
1 0-20
1,5 0-20
2 0-25
3 0-30
5 0-50
8 0-45
10
8135.indd 10 8135.indd 10
Test load (kg) Weight (kg)
15,68 2
19,61 4
29,41 7
39,22 8
58,83 15
98,06 21
156,89 37

Dimensions (mm)

B C D E
205 125 10 27
290 170 12 48
365 198 17 67
375 205 17 67
425 237 20 75
480 262 20 80
600 330 28 88
Fig. 1
EN I
F G H
105 35 40
145 45 56
168 55 56
175 56 56
215 60 78
232 65 90
290 80 100
23/02/21 11:01 23/02/21 11:01