Robur 8135 Instrucciones página 14

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
Customer assistance contacts
Beta Utensili SpA Robur DivisionZona Industriale,
C.da San Nicola, 67039 Sulmona (L'Aquila), Italy
Tel. +39 0864.2504.1 – Fax +39 0864.253132
info@roburitaly.com
EMERGENCY PROCEDURE IN THE EVENT OF AN INCIDENT
In the event of malfunction:
Stop all operations immediately.
Set up a safety barrier around the area.
Call for qualified technical personnel to remove the load.
MARKING
All the information on the accessory can be found on the plate attached to it (fig. 10).
How to read the markings:
1) Manufacturer's logo (Robur)
2) CE Mark
3) TUV-GS logo
4) Model number
5) Reference standard
6) Description
7) Series number
8) Month / year of manufacture
9) Max WLL
10) Min WLL
11) Opening
12) Manufacturer's name and address
13) Article name
The series number consists of two parts:
a) Batch number
b) Unit number
PROHIBITIONS
Do not:
Use the accessory if all the instructions in the general warnings have not been observed.
Use the accessory if the data plate and/or markings are missing and/or illegible.
Use the accessory if it and its component parts are not in good condition.
Use the accessory if its component parts have not been installed correctly.
Use the accessory if the safety devices are not operating correctly or damaged.
Fix the clamp in place with any device other than the suspension eyebolt.
Obstruct the joint of the suspension eyebolt.
Try to open the knurled cam or adjust the control lever when a load is applied.
Use the clamp for the horizontal movement of the sheets.
14
8135.indd 14 8135.indd 14
Fig. 10
EN I
23/02/21 11:01 23/02/21 11:01