Robur 8135 Instrucciones página 11

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
WARNING: min WLL = 10% max WLL
PERSONAL PROTECTION EQUIPMENT TO BE WORN
SAFETY FOOTWEAR
PROTECTIVE GLOVES
HELMET
INSTALLATION
Before starting the installation, read the general warning notices. In addition:
Check the WLL of the accessory to ensure that it has sufficient load-bearing capacity.
Check the correct operation of the closure mechanism and its components, with particular reference to the knurled cam and plinth,
eyebolt and joint.
The accessory should only be connected to the lifting sling after all the preliminary checks have been carried out.
Check the chain of the lifting sling for damage.
Check to ensure that the accessory is correctly connected to the sling through the eyebolt.
The accessory may be placed under load after these checks have been completed successfully.
Make sure the load applied is free to line up to the vertical lifting axis.
OPERATIONS
Move the lever from position A to position B to open the knurled cam (fig. 2).
Slide the sheet fully inside the clamp body housing (fig. 3).
8135.indd 11 8135.indd 11
Fig. 2
Fig. 3
EN I
11
23/02/21 11:01 23/02/21 11:01