Ce Declaration Of Conformity - Robur 8135 Instrucciones

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
Use the accessory for purposes or in configurations other than those described in this user manual.
Clean the accessory with high pressure equipment and/or aggressive chemical substances (such as acids and chlorinated products).
Use the accessory to lift loads in excess of the max WLL or below the min WLL.
Use the clamp to lift metal sheeting and/or components of a greater or lesser thickness than that of the range indicated,
Use the clamp to lift metal sheeting and/or components with a surface hardness in excess of 30 HRC (300 HB).
Use the clamp to lift more than one metal sheet and/or component at a time.
Use the accessory in ambient temperatures outside the -10°C ÷ 50°C range.
Use the accessory to lift a load when the wind speed renders it unstable.
Use the accessory to lift or move persons.
Use the accessory in explosive or corrosive atmospheres.
Attempt to lift or haul a load subject to restraints.
Use the accessory as an electric mass or conductor.
Pull a load to be lifted in the lateral direction.
Allow the load to swing.
Stand or move beneath the load.
Work on the accessory without first removing the load.
Wear loose clothing or garments which could become tangled up in the mechanism.
MAINTENANCE AND OVERHAUL TABLE
Date
We declare upon our sole responsibility that the product described conforms with all the relevant provisions of the 2006/42/CE Machinery
Directive and subsequent amendments, and with the following standards: EN 13155
The Technical File may be obtained from:
BETA UTENSILI SpA ROBUR DIVISION
Zona Industriale, C.da San Nicola,
67039 SULMONA (AQ),
ITALY
8135.indd 15 8135.indd 15
Description Notes/Results

CE DECLARATION OF CONFORMITY

EN I
Signature
23/02/21 11:01 23/02/21 11:01
15