Choosing A Location; Ac Power Supply - Sartorius Secura Instrucciones De Instalación Y Manejo

Inserting (or Removing) Glass Panels
1) Holding it by its rear edge, pull the
draft shield cover up and remove it.
2) Push the three glass panels into the
draft shield guide, all the way to the
front.
3) Then replace the draft shield cover.
In doing so, the draft shield cover
must lock into position.
Balance with No Draft Shield
Install the following parts in the order
t
listed:
1) In-use dust cover (not shown in the
illustration).
2) Install the shield disk and turn this
counterclockwise until it snaps
securely into place.
3) Install the pan support (1) and
weighing pan (2).

Choosing a Location

Select the right setup location:
– Set up the device on a stable, even surface that is not exposed to
vibrations (e.g., weighing stone).
– Maintain free access to the device at all times.
Choose a location that is not subject to the following negative
influences:
– Heat (heater or direct sunlight)
– Drafts from open windows, AC systems, and doors
– Vibrations during weighing
– Heavy traffic areas (personnel)
– Excessive moisture
– Electromagnetic fields
Acclimatization
Condensation from humidity can form on the surfaces of a cold
device when it is brought into a substantially warmer area. To avoid
the effects of condensation, condition the balance for about two
hours, leaving it unplugged from the power supply, before plugging
the balance back into the mains.

AC Power Supply

AC Adaptor Assembly
Fatal electric shocks can be caused by use of the
incorrect power plug adapter or improper use of
the power plug adapter.
Attach the country-specific power plug adapter
t
to the AC adapter. The power plug adapter must
be suitable for the wall outlet at the installation
location.
Do not insert the power plug adapter into the
t
socket without an AC adapter.
Item Power supply/country-
number on specific power plug
packaging adapter (packed in
PE bag with printed
country code, e.g. EU)
YEPS01-PS4 Power supply with
connection cable
China (CN)
South Africa (ZA)
Australia (AU
India (IN)
USA and Japan (US+JP)
Europe (EU)
United Kingdom (UK)
YEPS01-PS5 Power supply with
connection cable
Argentina (AR)
Brazil (BR)
Korea (KR)
Select the country-specific power
t
plug adapter. The power plug adapter
must be suitable for the wall outlet
at the installation location.
Push the power plug adapter into
t
the AC adapter's holder. The ribbed
button must be facing forward.
Push the power plug adapter all the
t
way in until it audibly engages.
Check that the power plug adapter
t
is firmly locked in place. To do this,
gently pull on the power plug
adapter.
y If the power plug adapter cannot be
moved then it is locked in place.
Installation and Operating Instructions Secura
English
Illustration
(from left to right)
® ® ® 5
, Quintix , Practum