Fisher-Price FP2000 Manual Del Usuario página 9

FC0823W-ICA 22/12/09
Pass the child's arm through each of the shoulder straps whilst bringing together the
connectors on the shoulder straps, align them together and insert into the buckle until
you hear a click (10) (11) (12).
Check that the lap section and shoulder section are not twisted and the connectors can
fit together correctly before inserting the connectors into the buckle.
Make sure the lower lap straps are as low as possible to retain the pelvis.
This car seat is approved as Group 0 for children from birth to 10 kg (birth to 9 months approx.)
- in a rearward facing position.
The seat is also approved as Group 1 for children weighing 9 kg to 18 kg (9 months - 4 years approx.)
- in a forward facing position.
Do not use forward facing until your child's weight is at least 9 kg.
For rearward facing the child seat must be in the fully reclined position (18).
Refer to section 'Seat Reclining for details of how to recline the seat.
Place the child's car seat on a passenger seat of a car making sure the child seat is facing
rearwards.
8:46 Page 7
WARNING!
A CORRECTLY ADJUSTED
HARNESS IS ESSENTIAL FOR YOUR
CHILD'S PROTECTION. THERE
SHOULD NOT BE MORE THAN A
FINGERS WIDTH BETWEEN THE
HARNESS AND YOUR CHILD.
Fitting your Child Seat into your Car
Rearward Facing - Group 0
WARNING!
THE BUCKLE OF THE VEHICLE BELT
MUST NOT COME ABOVE THE LAP
BELT GUIDE OF THE CHILD SEAT.
IF THIS IS THE CASE, TRY ANOTHER
SEAT OR CONTACT OUR
CUSTOMER SERVICE DEPARTMENT
IN CASE OF DOUBT.
7