Timer Recording - Packard EDR-2000 Guia Del Usuario

All manuals and user guides at all-guides.com
EDR-2000-UG.book Page 23 Jeudi, 20. octobre 2005 8:32 08
• Press the REC/OTR button and then press the PLAY button to start recording.
• During the recording process, press the PAUSE button to suspend recording of the unit, and press the
button again to suspend the DV. To restore play of the DV, press the PLAY button; if you press the REC/
OTR button, the play of the DV and the recording of the unit will resume at the same time; press the
FWD , REV button to complete forward or rewind operation for the DV, while it reports Pause status to
the unit; If you press the STOP button, the recording of the unit will stop first, and press again to stop
the play of the DV.
Caution:
Do not move the unit or switch off the power during the recording process. Be sure to switch off the power
of the unit and the DV before connecting the DV cables.
T R
IMER ECORDING
This function enables the unit to start recording according to the preset requirement once the scheduled time
is reached. After the recording is done, the unit is in standby status. To start timer recording, set up a recording
schedule at first and configure the system according to the requirement. Before setting up the timer recording,
set the system clock first.
1. Press the TIMER button to enter the timer recording schedule setup menu, as shown. There are 8
records in this menu. Each record represents a recording schedule.
2. In the timer recording setup menu, use the Up or Down button to select a record, and press the Select
button.
3. Setup the input source in the Item Editor dialog box, use the Up/Down arrow and Select buttons to
select the value of SOURCE.
English -
23