Channel Scan - Packard EDR-2000 Guia Del Usuario

All manuals and user guides at all-guides.com
EDR-2000-UG.book Page 28 Jeudi, 20. octobre 2005 8:32 08
1. Press the SETUP button to enter the System Setup mode. Now the system setup control bar menu will
appear on the top of the OSD, as shown in the following chart.
The meanings of the icons are as follows.
• (1) GENERAL Settings
• (2) PLAYBACK Settings
• (3) RECORD Settings
• (4) LANGUAGE Settings
•

(5) CHANNEL SCAN

• (6) CLOCK Settings
2. Use the Up or Down button to select
items to be setup in the control bar and
press the SELECT button to enter the
setup menu of the item. In the setup
menu of a certain item, press the arrow buttons and the SELECT button to operate some control units,
and the corresponding setting will be done.
3. Press the RETURN button to return to the upper level menu. Press the SETUP button to exit the System
setup mode.
Note: The above steps are general and typical operations. Some settings might not need a certain step, or
require more steps. Please set up the system in the Eject Disc mode or No Disc mode, or some settings cannot
be done.
General Settings
1. Enter the System Setup mode.
2. In the System Setup control bar menu, use the Up or Down button to select the General item.
3. Press the SELECT button to enter the General Settings menu.
Screen Saver
The Screen Saver function means that when the unit is idle (or without monitored output) for some time,
some screen saver pictures will appear automatically.
1. In the General Settings menu, use the Up or Down button to move the cursor and select the Screen Saver
item.
2. Press the SELECT button and the Screen Saver item will drop down a list.
3. Use the Up or Down button to move the cursor, and select ON or OFF .
4. Press the SELECT button to enable or disable the Screen Saver function.
When the screen saver appears, press any button to exit it.
5. Press the RETURN button to return to the upper level menu and
set up other items.
Progressive/Interlace
1. In the General Settings menu, use the Up or Down button to move the cursor, select the Progressive/
Interlace item and press the SELECT button.
2. Select the Progressive or Interlace option for video scan output mode, and press the SELECT button to
confirm.
* This function can also be selected by pressing PS/IS button in the remote controller.
Video Out
1. In the General Settings menu, use the Up or Down button to move the cursor, select the Video Out item
and press the SELECT button.
2. Select YUV, RGB or CVBS terminal according to your need and press the SELECT button to confirm.
EDR 2000 DVD Recorder User's Guide
28 -