Packard EDR-2000 Guia Del Usuario página 30

All manuals and user guides at all-guides.com
EDR-2000-UG.book Page 30 Jeudi, 20. octobre 2005 8:32 08
Analogue Audio Output
The unit can set the analogue audio output as 2-CH or 5.1-CH. The output of 2-CH comes from L and R
channels.
1. Enter the play settings menu, use the Up or Down button to select Analogue Audio Output item, and
press the SELECT button.
2. Use the Up or Down button to select 2-CH or 5.1-CH, and press the SELECT button to confirm.
Recording Setting
After completing various settings in this section, further recording operations will take these settings as
default value.
1. In the system setup control bar menu, use the Up or Down button to select the RECORD item, and press
the SELECT button to confirm. Then the Recording Setting menu will appear.
Automatic Chapter Marker
1. In the Recording Settings menu, use arrow buttons to select Automatic Chapter Marker , and press the
SELECT button to drop down a menu.
2. Use the Up or Down button to select a proper value (ON or OFF), and press the SELECT button to
confirm.
3. Press the RETURN button to return to the upper level menu and set up other items.
* This setting is to determine whether to insert a chapter label automatically in recording.
Recording Quality
1. In the Recording Settings menu, use the Up or Down button to select the Default Quality item, and press
the SELECT button to drop down a menu.
2. Use the Up or Down button to select a desired value and press the Select button.
3. Press the RETURN button to return to the upper level menu and set up other items.
Language Settings
1. To satisfy the needs of consumers in different regions, the unit provides various interface languages.
2. Enter the system setup mode. In the System Setup control bar menu, use the Up or Down button to move
the cursor, select the Language item, and press the SELECT button to enter the Language Settings menu.
EDR 2000 DVD Recorder User's Guide
30 -