charging your headset
The headset contains a rechargeable Li-ion polymer battery. Prior to using the headset for the first time, it is
strongly recommended to fully charge the battery for 3 hours.
Allow the headset and charger to snap into place by drawing the magnetic discs together [01]. Connect the USB
cable to your PS3™ and the mini usb to the headset's magnetic snap charger [02]. The LED will illuminate red
during the charging process and will be blue when fully charged. NOTE: Charging indication will be delayed for a
few minutes if the headset has not been used for a long time.
charging time
Normally the battery is fully recharged
within 3 hours. As soon as the battery is
fully charged, the LED will be Blue.
Disconnect the USB cable from the
PS3™ and the charger.
02
MAGNETIC DISCS
08 | CHARGING
All manuals and user guides at all-guides.com
game time
The fully charged battery offers up to
8 hours continuous use. It is advisable to
always recharge after lengthy gameplay
so the headset is fully charged for the
next round.
02
01
operating your headset
1. To power on your headset, press and hold the power button for 1 second until the LED flashes Green.
NOTE: If the LED flashes Red only, the battery will need to be charged.
2. To fit your headset comfortably, flex the earhook and loop it around your ear. Position the speaker in your ear
for optimal audio performance.
3. To power off your headset, press and hold the power button for 1 second until the LED flashes Red.
adjusting volume
muting
Tap the + button to increase the volume
Press the power button briefly
in increments until the headset reaches
(less than 1 second) repeat the
your desired volume level.
process to un-mute. When in mute
mode the LED will flash Blue every 2
Tap the - button to decrease the volume
seconds, and Red every 4 seconds.
in increments until the headset reaches
your desired volume level.
Do not try
to pair the
02
headset to
the console,
when the
headset is
VOLUME DECREASE
charging. If it
is charging,
it will not pair
to the PS3™.
01
VOLUME INCREASE
POWER / MUTE
OPERATION | 09