Hose Installation - Toto Soirée TL960DDLQR Manual De Instrucciones Y Del Propietario

Hose Installation

1. Connect the flex hoses to the
T-connector as shown.
2. Make adjustment according
to the installation situation.
3. Secure connections with
adjustable wrench.
Drain Installation
1. Apply pipe tape to the flange
threads.
2. Insert flange into the drain hole
3. Assemble the gasket, flange nut,
and lock nut.
4. Install the drain body onto the
flange.
5. Secure the drain assembly by
tightening the flange nut and lock
nut.
6. Apply pipe tape to the threads of
the tail piece and install the tail
piece to the drain body.
7. Insert the drain stopper into the flange.
8. Assemble the pivot rod as shown in the diagram.
9. Insert the pivot rod into the drain stopper hole and tighten the lock nut
10. Insert the lift rod and pivot rod into the connecting block. Tighten both
rods with screwdriver
Supply Connections
1. Connect water supply tube
to the valve body.
2. Tighten connections with
adjustable wrench.
3. Check all connections to
make sure there are no
leaks.
INSTALLATION PROCEDURE
5
T-connector
Drain stopper
Flange threads
Flange nut
Lock nut
Drain body
Tailpiece threads
Tailpiece
Flex hose
Flange
Lift rod
Gasket
Pivot rod
Gasket
Spring
Seal
Connecting
block