Publicidad
Idiomas disponibles
Idiomas disponibles
Parts and Functions
Key descriptions
MODE
Mode/ESC key. Press this key for toggling between modes in the main interface and press this
B A C K
key to go back to the previous interface.
MENU
Menu key. Press this key when in the main interface to enter the menu interface. The
SCHEDULE
SCHEDULE key below indicates the weekly timer setting.
Temperature adjustment keys. Press these keys to adjust the temperature in the main interface.
TEMP.
When the ECO function is not set, the temperature range is 16°C–30°C; temperature can be
TEMP.
varied in steps of 1°C. When the ECO function is set, the temperature range is limited. The
temperature adjustment keys are used for positioning the cursor when not in the main interface.
Unit No. adjustment keys. They are used for adjusting the unit or group unit no. These keys
NO.
are used for selecting between a unit or a group unit in the main and unit & group selection
NO.
interfaces; the options are as follows: unit→group→ALL→unit.
OK
OK key
Fan key. Press this key to adjust the fan speed.
The options are
FAN
Auto Fan circulates as
ON/OFF key. In the main interface, short-press or tap this key to toggle between the ON/OFF
state of the unit or group (smallest unit) unit on which the cursor is placed. For example, if the
smallest unit in the group is in the ON state, after short pressing the ON/OFF key, all units in
this group will change to the OFF state. After pressing and holding the ON/OFF key down for
5 s, if the unit or smallest unit of a group on which the cursor is positioned is in the ON state,
all online units and groups will change to the OFF state, and vice versa. That is, if the smallest
unit in the group on which the cursor is positioned remains in the OFF state, after pressing and
holding down the ON/OFF key for 5 s, all units and groups online will change to the ON state.
(Low)→
(Auto) →
AUTO
AUTO
(Middle) →
(Low)
→
→
AUTO
3
(High) →
→
AUTO
AUTO
Publicidad
