Technical Data - Gewiss Chorus GW 10 794 Manual De Instalación

All manuals and user guides at all-guides.com
Communication
Power supply
Current absorbed by BUS
BUS cable
Command elements
Outputs
Max. switchover current
Max. power for the type of load
Inputs
Visualisation elements
Measuring elements
Temperature adjustment range
Usage environment
Operating temperature
Storage temperature
Relative humidity
Connection to the BUS
Electric connections
Degree of protection
Size
Standard references
Certifications

TECHNICAL DATA

KNX BUS
Via KNX BUS, 29 V DC SELV + 2 alkaline batteries 1,5 AA
(not included) for maintaining the date and time in
the event of a BUS voltage failure.
10 mA
KNX TP1
4 front button keys
1 miniature button key for programming the physical address
1 relay with NO/NC potential-free contact
5A (cos =1), 250
Incandescent and halogen lamps (230V AC): 500W
Halogen lamps commanded by electronic transformers: 100W
Halogen lamps commanded by ferromagnetic
transformers: 200VA
Compact fluorescent lamps: 3x23W
Motors and gear motors: 100W
For all loads not indicated here, you are advised to
use a support relay
1 input for potential-free contact
(max. cable length 10m)
1 input for external temperature sensor (e.g. GW 10 800)
(type NTC 10K)
1 RGB colour display with front light intensity
sensor for adjusting the backlighting
1 red LED for programming the physical address
1 internal sensor
adjustment range: 5 °C .. +40 °C
measurement range: 0 °C .. +60 °C
measurement resolution: 0,1 °C
measurement accuracy: ±0,5 °C between +10 °C and +30 °C
T anti-freeze: +2 -+7 °C
T high temperature protection: +30 - +40 °C
Other Setpoints: +5 - +40 °C
Dry, indoor places
-5 - +45 °C
-25 - +70 °C
Max. 93% (non-condensative)
Coupling terminal, 2 pins, Ø 1 mm
Screw terminals - max. cable section: 2,5 mm²
IP20
3 Chorus modules
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive
2004/108/EC, EN50090-2-2, EN50428
KNX
25
V AC
E
N
G
L
I
S
H