Kreg Jig K4 Manual Del Propietário página 4

3
K4 and K4 Master System Parts
A
Base
Features setup gauges for positioning the stop collar on the drill bit. Includes four
holes for securing the jig to a workbench or other surface. A recess at the front of
the base accepts a clamp head for temporarily securing the jig to your workbench.
B
Drill-guide socket
Accepts all Kreg drill guides: Micro, Standard (included), and HD.
C
Toggle clamp
Secures the workpiece to the jig.
D
Clamp pad
Adjusts to workpiece thickness.
E
Standard drill guid
Features positioning marks for different workpiece thicknesses.
F Drill-guide locking pin
Locks the drill guide into the drill-guide socket at the selected setting.
Step bit
G
Simultaneously drills a pilot hole and clearance hole, forming a bearing shoulder
for the screw head.
H Stop collar
Fastens to the drill bit to control drilling depth.
I
Hex wrench
Tightens the stop-collar set screw. Stores in a recess at the rear of the base.
J
Driver bit
#2 square-drive bit 6" (152mm) long.
Pocket-hole plug sample pack
K
Contains five paint-grade wood plugs
Additional Master System Parts
The K4 Master System includes the following parts
L Portable base
Accepts Micro, Standard, and HD drill guide blocks. Useful for large panels or
assemblies that would be difficult to clamp into a bench-mounted jig. Built-in cams
secure the portable base to your Kreg face clamp
M
Workpiece support stop
Supports large workpieces and incorporates a swing-up, micro-adjustable
workpiece stop.
N
Vacuum port
Accepts a 1¼" (32mm) shop vacuum hose for efficient chip removal.
800-447-8638
Parts
e