urmet domus 1092/601 Manual De Instrucciones página 34


Secure the bracket to the dome using the round-headed screws with rubber washer (included).
Fasten tightly in the three holes on the sides of the bracket (screw 3).

Position the dome in the chosen point on the wall making the wire pass through the slot located in the
bracket or make a further hole on the wall at the outlet wire from the bracket of diameter sufficient to
let the connected wire through.

Fix it securely to the wall using the four holes in the bracket base. Use 4 M6 screws (not included).
The position of the hole in mm is shown below for convenience.
34
All manuals and user guides at all-guides.com
70
50
3
2
1
4 holes  8
DS1092-041C