Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Remove accumulated dust from inside of
capsule and off of prefilter.
1
009995
Twist prefilter in direction of arrow to
unfasten securing lip from cleaner unit and
then pull off prefilter.
1
009996
Clean out fine dust from prefilter. Next,
remove filter, and lightly tap to dislodge dust.
Reassembly
1
009997
Put on filter until it is fully in position on the
cleaner unit.
NOTE:
Make sure filter is put on straight
•
without being peeled back. If filter is put
on incorrectly as shown in diagram,
dust will get into motor housing, and
cause motor failure.
1. Prefilter
2
2. Securing lip
1. Prefilter
2. Filter
2
1. Prefilter
1
010005
Connect prefilter. At this time, make sure to
twist prefilter so that securing lip is firmly
locked into cleaner unit.
1
009999
010000
Connect capsule. Align O symbol on
capsule with O symbol on handle and then
firmly twist capsule in direction of arrow until
it is secured.
1
010001
6
1. Filter
1. Prefilter
1. Mark
Publicidad
Tabla de contenido
