Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
010002
NOTE:
Always remove dust ahead of time, as
•
suction power will be reduced if there is
too much dust in cleaner.
Always be sure to check that both filter
•
and prefilter are loaded correctly prior to
using cleaner. If they are not loaded
correctly, dust will get into the motor
housing, and cause motor failure.
If the following examples occur, filter
and prefilter are not loaded correctly.
Reload
them
problem.
Problem Examples
Example 1: Only prefilter has been loaded
(no filter)
010003
Example 2: Only filter has been loaded (no
prefilter)
1
010004
1. Handle
1
2. Capsule
2
correctly
to
1. Prefilter
1
1. Filter
Example 3: Filter has been loaded in a
peeled back state
010005
Example 4: Prefilter's securing lip is not
firmly locked into groove of cleaner housing
2
rectify
010006
OPERATION
CAUTION:
To connect attachments, such as nozzle,
•
twist-insert attachment in direction of
arrow to ensure secure connection
during use. To disconnect attachment,
twist-extract also in direction of arrow.
If attachment is twisted in the opposite
direction, when being connected or
disconnected, capsule may become
loose.
009987
7
1
3
1
1
1. Filter
1. Groove of
cleaner housing
2. Prefilter
3. Securing lip
1. Capsule
Publicidad
Tabla de contenido
