Record Measurements (Data Logger Version Only) - WEBTEC HPM 110 Instrucciones De Manejo

12 Press the RESET/OK/START/STOP key.
13 Press the MIN/MAX/FS key to place the separator.
14 Press the RESET/OK/START/STOP key.
Ä The date and time are set.
4.14

Record measurements (data logger version only)

Up to 10 measurements with a length of up to 24 hours each can be
recorded.
1
Press the RESET/OK/START/STOP key for 2 s to start re-
cording.
Ä REC flashes in the display and the measurement is re-
corded.
2
Press the RESET/OK/START/STOP key for 2 s to stop re-
cording.
Ä REC disappears in the display and the recording is saved.
Operation
27