Height Adjustment - Nuna Bugaboo Turtle Air Manual Del Usuario

The load leg must be installed correctly with green
indicator. (12)-2
6
To remove the base, press the secondary lock button
(13)-1 first and then the button (13)-2 on the latch
connectors before removing the base from the vehicle
seat.
7
Press the ISOFIX adjust button to fold the ISOFIX.
8 Push the infant carrier module down into the base
(14), if the enhanced child restraint is secure, the side
impact protection wings will be open and the enhanced
child restraint indicator shows green. (15) The side
impact protection wing which is away from the door
can be closed as shown on (16) when not in use.
Pull up on the infant carrier module to be sure it is
securely latched into the base.
9 To release the infant carrier module, pull the enhanced
child restraint up while squeezing the infant carrier
module release button. (17)
16
BGB Nuna Turtle 2 UG_rv001 Part1 120x170.indb 16-17 BGB Nuna Turtle 2 UG_rv001 Part1 120x170.indb 16-17
All manuals and user guides at all-guides.com

Height adjustment

for head support and shoulder harnesses
Check that Shoulder Harness Straps are set at the proper
height. Please choose the proper pair of shoulder harness
slots according to the child's height.
Pull the head support adjustment lever (20), meanwhile pull
up or push down the head support until it snaps into one of
the 7 positions. The head support positions are shown as
(21).
Shoulder Harness Straps must be nearest to your
childs shoulders (18), but not above the shoulder line.
(19)
If the Shoulder Harness Straps are not at proper height,
the child might be ejected from the enhanced child
restraint if there is a crash.
17
22-02-2020 18:33 22-02-2020 18:33