Connections (Continued)
Radio Aerial Connections
Connect the supplied FM/AM antennas for radio listen-
ing.
Connect the AM loop antenna to the AM antenna
1
connectors.
Connect the FM wire antenna to the FM antenna
2
connectors.
Notes
To prevent noise pickup, keep the AM loop antenna
away from the DVD/VCR Receiver and other compo-
nents.
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori-
zontal as possible.
Accessory Audio/Video (A/V)
Connections to DVD/VCR Receiver
Connect the AV3 IN jacks on the DVD/VCR Receiver to
the audio/video out jacks on your accessory compo-
nent, using optional audio/video cables.
Digital Device Connections
Connect the OPTICAL IN jacks on the DVD/VCR
Receiver to the digital audio out (optical) jacks on your
digital device (Game device, Digital Set Top Box, etc.),
using optional optical audio cable.
To select source of DVD/VCR Receiver to OPTICAL IN,
press INPUT SELECT repeatedly on the remote control
until "AV3 OPT" appears in the display window.
Notes
If the audio format of the digital output does not
match the capabilities of your DVD/VCR Receiver, the
DVD/VCR Receiver will produce a strong, distorted
sound or no sound at all.
The Optical input function is available only when the
other unit's Sampling Frequency is 32 - 48kHz.
11
GB