VIDEO Operation Setup
Video channel set
Video channel (RF output channel) is the channel on
which your TV receives picture and sound signals from
the DVD/VCR Receiver through the RF cable.
If you have used a
SCART
your TV, simply select the AV channel. The AV channel
is already pre-tuned for optimum video playback on
your TV.
Perform the following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connec-
tion to AV connection, or vise versa.
Turn on DVD/VCR Receiver and TV.
1 1
Set the vacant position 36 on your TV.
2 2
Press @ / 1 on the remote control to enter the
3 3
standby mode.
Press and hold CH/PRESET + or – on the
4 4
DVD/VCR Receiver for more than
4 seconds.
RF 36 will appear in the DVD/VCR Receiver dis-
play.
RF CHANNEL
P
SET
R
The following picture will be displayed on the TV
screen.
If the picture is snowy, move to step 5.
If the picture is clean, press @ / 1 on the DVD/VCR
Receiver to store the RF channel. The video chan-
nel is now set.
5 5
Press CH/PRESET + or – on the DVD/VCR
Receiver to set the video channel to a vacant
position between 22 and 68 which is not occu-
pied by any local station in your area.
You can also set it to "OFF" if there is any inter-
ference when your TV is connected to the
DVD/VCR Receiver.
Note
The RF channel will not change until step 6 has been
executed.
Press @ / 1 to store the new RF channel into the
6 6
DVD/VCR Receiver.
Press @ / 1 to bring the DVD/VCR Receiver from
7 7
standby to on and follow your TV manufacturers
tuning instruction manual to tune a new channel
to the DVD/VCR Receiver.
lead you will not have to tune
36
i
How to use the main menu
This DVD/VCR Receiver can easily be programmed by
using the menus displayed on screen.
The menus are controlled from the Remote Control
Handset.
Switch on your TV set and DVD/VCR Receiver
1 1
by pressing @ / 1.
Press MENU (i).
2 2
The main menu will appear on the TV screen.
A B
1 2
C
Pr-12
P SET
TIME
SYS-
REC
ACMS
OSD
R
DATE
TEM
REC
f
OSD
OSD
NIC
+
-
ON
16:9
DECO-
OK i
OFF
4:3
DER
OPR
REC
Timer recording setting (see pages 27).
PR SET
Manual tuning setting (see page 16-17).
ACMS
ACMS (Automatic Channel Memory System) (see
page 16).
TIME DATE
Date and clock setting (see page 18).
SYSTEM
O
To set the Colour TV System (see page 19).
ABC OSD
O
To change the language setting for OSD. You can
select the language from English, German,
French, Italian, Spanish, Dutch, and Portuguese.
fOSD ON/OFF
O
To display the operational mode of your
DVD/VCR Receiver (see page 30).
16:9/4:3
O
To select the aspect ratio of your TV
(see page 28).
DECODER
O
To use a pay-TV decoder with your DVD/VCR
Receiver (see page 28).
OPR
O
To improve the playback picture (see page 24).
NIC
O
To activate or deactivate the NICAM digital sound
(see page 28).
Press B or b to select the desired menu.
3 3
Press ENTER/OK and press V or v to select.
4 4
Press MENU (i) to return to a TV picture.
5 5
Note
The VIDEO main menu will appear incorrectly when NTSC
video source is inputted to the DVD/VCR Receiver.
Indicates current
selected icon.
15
GB