Speaker Setup
You can set your personal preferences on the DVD func-
tion mode.
Adjust the following settings for the built-in 5.1 channel
surround decoder.
Press SETUP/MENU.
1
The Setup menu appears.
Disc Audio
Disc Subtitle
Disc Menu
Rating
Area Code
TV Aspect
Menu Language
5.1 Speaker Setup
Others
Select "5.1 Speaker Setup" using the V/v
2
buttons on the setup menu.
While "5.1 Speaker Setup" is selected,
3
press b button.
Press b buttons to select the desired speaker.
4
Adjust options by using V/v/B/b buttons.
5
Speaker selection
Select a speaker that you want to adjust. ((Front speak-
er (Left), Front speaker (Right), Center Speaker, Rear
speaker (Left), Rear speaker (Right), or Subwoofer))
Note
Certain speaker settings are prohibited by the Dolby
Digital licensing agreement.
Volume
Press B / b to adjust the output level of the selected
speaker. (-6dB ~ 6dB)
Size
Since the speaker settings are fixed, you cannot change
the settings.
Subwoofer's size is fixed "Large" and the other
speaker's size are fixed "small".
38
GB
R
R
Front L
Volume
0 dB
Size
Small
Distance
0.3m
Test
Return
Distance
If you connected speakers to your DVD/VCR Receiver,
setting the Distance lets the speakers (except sub-
woofer) know how far the sound has to travel to reach
your set listening point. This allows the sound from each
speaker to reach the listener at the same time
(0.3 - 6.0 m, 0.3m=1ft).
Note
You can not set the distance of subwoofer speaker.
Test
Press ENTER/OK to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
→
Front Left (L)
Center
→
Rear Right (R)
Rear Left (L)
You can stop the test using V/v.
Return
Press ENTER/OK to return to the previous menu.
→
→
Front Right (R)
→
Subwoofer