Horizon Global 25001 Instrucciones De Instalación página 4

1. Remove underbody panel - Using a flat head screwdriver and 10 mm socket, remove (4) rivets, (2) nuts respectively from driver side underbody panel. Remove the
panel.
2. Lower exhaust– Using an exhaust hanger removal tool, lower muffler by removing (2) rearmost rubber hangers. A spray of lubricant or soapy water on rubber
hangers makes them slide off metal pins more easily. NOTE: Be sure that exhaust is properly supported before removing rubber hangers.
©2021 Horizon Global Americas Inc. - Printed in Mexico
Figure 3
Sheet 4 of 21 25001NP 02-03-21 Rev. A