Dell PowerEdge C6105 Procedimientos Iniciales Con El Sistema página 6

All manuals and user guides at all-guides.com
1 Align the end pieces of the rails on the vertical rack flanges to seat the
pegs in the bottom hole of the first U and the top hole of the second U.
Engage the back end of the rail until the latch locks in place.
NOTE: The rails can be used in both square-hole (item 1 in figure below)
and round-hole racks (item 2 in figure below).
2
Repeat step 1 to position and seat the front end piece on the vertical
flange.
NOTE: To remove the rails, pull on the latch release button on the end
piece midpoint and unseat each rail.
3 Slide the system into the rack.
4 | Getting Started With Your System