Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock
The hob should be turned off.
To activate: press the
symbol for approximately 3 seconds.
˜
The
indicator lights up for 10 seconds. The hob is locked.
‚
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Usage restrictions
This function can always be activated for a hotplate, provided
the other hotplate in the same group is not in use (see
illustration). Otherwise,
˜
display; the
heat setting is then set automatically.
Š
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Switching off a hotplate automatically
When the selected time has elapsed, the hotplate switches off
automatically.
Set the cooking time.
The hob must be switched on.
Select the hotplate and the required heat setting using the
1.
twist knob.
Touch the
3
symbol. The
2.
up.
‹‹
appears in the timer display.
30
Š
.
and
flash in the heat setting
Š
x
display for the hotplate lights
To deactivate: press the
˜
3 seconds. The lock is now deactivated.
Childproof lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
All of the relevant information on the automatic childproof lock
connection can be found in the Basic settings chapter.
Note: In Group 1, the powerboost function can only be
activated if the two hotplates are used independently of each
other.
To activate
Select the hotplate using the Tipp control.
1.
Press the
symbol.
˜
2.
The function has been turned on.
To turn off
Select the hotplate using the Tipp control.
1.
Press the
symbol.
˜
2.
The Powerboost function has been deactivated.
Note: In certain circumstances, the Powerboost function may
turn off automatically in order to protect the electronic
components inside the hob.
Select the required cooking time with the twist knob.
3.
The timer starts counting down after a few seconds.
Notes
The same cooking time can be set automatically for all
■
hotplates. The set time for each of the hotplates counts down
independently.
The Basic settings section contains information on
automatically programming the cooking time.
If the combi zone or move function is selected when the
■
hotplates are combined, the set time is the same for both
hotplates.
symbol for approximately