Installation Of Handpiece; Installation And Removal Of Water Supply Bottle - DENTSPLY DeguDent Cercon Manual Del Usuario

3.3 Installation of Handpiece

Install the handpiece hose to the handpiece connector on
the front face of the unit (Fig. 3). Install the handpiece hose
to the coupling joint (Fig. 4). And then, install the hand-
piece by pulling the ring of the coupling joint (Fig. 5).

3.4 Installation and Removal of Water Supply Bottle

Installation: Push in the bottle attaching/detaching switch
on the back of the control unit until it is locked (Fig. 6).
Insert the water supply bottle from above, and push it in
until the bottle attaching/detaching switch returns pro-
perly. Check to see if the water supply bottle is securely
installed by pulling it upward.
• Check to see if the bottle attaching/de-
taching switch has returned properly and
the water supply bottle is securely in-
stalled. Otherwise, water and air may leak,
and the water supply bottle may pop out.
All manuals and user guides at all-guides.com
Installation Procedures of Each Component 3
Fig. 3
Fig. 4
Fig. 5
Water Supply Bottle
Bottle Attaching/Detaching Switch
Fig. 6
23