Using Your Appliance - Duronic BL78 Manual Del Usuario

All manuals and user guides at all-guides.com
• Always switch the appliance off and remove the plug and lid before using the
jug to serve soup.
• Keep your fingers away from moving parts and fitted attachment
• When in use, the surfaces of the appliance will become very hot, therefore
the handle must always be used.
• The use of accessory attachments other than those supplied is not
recommended.
• When the appliance is used for reheating soup, always ensure soup is piping
hot before serving.
• Never exceed the maximum capacity outlined in this instruction manual.
• Caution: The blades inside this jug are very sharp, extreme caution must be
taken during cleaning.
• Do not use the appliance outdoors.
• Do not immerse cords, plugs or any part of the appliance in water or any
other liquid.

Using Your Appliance

This Soup Maker can serve up to 4 people and is ideal for both smooth and
chunky soup. The auto functions allow you to stand back as healthy nutritious
meals are made for you in as little as 25 minutes and the preferential
blending functionality means your soup can be perfected to how you like it.
1. Begin by washing your vegetables, and peeling away any with hard skin (i.e.
potatoes and carrots).
2. Chop your ingredients into pieces no larger than 2.5cm.
3. Remove the lid of your Soup Maker and add all of the ingredients into the
serving jug. Top up the ingredients with cold water, ensuring you do not exceed
the max fill line indicated on the glass jug
4. To reach the minimum soup fill line, you will need 250g of chopped ve -
etables and 17 oz liquid. To reach the maximum amount of soup, add 400g
chopped vegetables and 41 oz of liquid.
5. Note: You can use the pulse button at the end of cooking to ensure your
soup is made to your desired consistency.
6. Once all of your ingredients have been added to the Soup Maker, place the
lid back on the serving jug, making sure it is securely in place.
7. Plug the Soup Maker into the outlet. When the Soup Maker is plugged in,
a beep will sound. Select the Start/Stop button, the lights on the control panel
will now begin to flash
9