Display Description - SMA SUNNY TRIPOWER STORAGE 60 Instrucciones De Instalación

9 Service
ID Display
402 DC voltage
exceeded
high limit
403 DC voltage
exceeded
low limit
491 Inverter lost
communicat
ion from
battery
492 not defined The formatting of the
System-Related Events
ID Display
2000 Comm
board
booted
2010 Ctrl sw
update
started
2011 Ctrl sw
update
ended
2012 - -
2018
2030 Grid code
IFTP failed
2050 Link up
2051 Link down
38 STPS60-IA-xx-13
Description
The DC voltage is too high.
The DC voltage is too low.
Communication Errors
transmitted battery parameters
is not compatible.
Description
Communication assembly is
booting.
The software update of the
main CPU has
started / has finished.
The software update of the
main CPU has
started / has finished.
The software update failed.
Transmission of the grid code
to the main computer failed.
Ethernet connection is active
Ethernet connection is
disconnected
Measure
Check the battery management
system.
Check the battery management
system.
Check cabling.
Restart the inverter. If the fault still
occurs, please contact the battery
manufacturer.
Measure
None
None
None
Restart the software update. If an
error occurs during the update,
contact Service.
If this event occurs frequently,
contact Service.
No measure necessary. This error is
used, for example, to identify bad
Ethernet cables.
No measure necessary. This error is
used, for example, to identify bad
Ethernet cables.
SMA Solar Technology AG
DN SMA Se DC
O rvice Lin
e
- - x
- - x
- x x
- - x
DN SMA Se DC
O rvice Lin
e
- - -
- - -
- - -
- x -
- x -
- - -
- - -
Installation Manual