Product Description; Manufacturing Features - Tecno-gaz STERILAIR PRO Manual Del Usuario

PRODUCT DESCRIPTION

MANUFACTURING FEATURES
Dimensions wall‐mounted /with stand
Weight wall‐mounted /with stand
Packaging dimensions wall‐mounted device
Packaging dimensions stand
Power supply voltage
N° of phases
Power supply frequency
Max absorbed power
Fuse
The device is a UVGI (ultraviolet germicidal irradiation)
recirculation unit for bacterial and viral load reduction.
The germicidal action is implemented through the elimination
of the microbial load in the air in safe conditions by exploiting
short wavelength UV radiation (in UV‐C spectrum).
These radiations kill microorganisms thus reducing the
bacterial load in the air.
The operation is based on a closed cycle forced ventilation
system. The air suctioned into the module first passes
through a filter where larger pollutants are blocked. It then
enters inside and comes into direct contact with the UV‐C
radiations which perform the maximum germicidal action.
Finally air is exhausted by the outlet vent thus determining
environmental microbiological elimination. Its greatest
advantage consists in being perfectly safe for people since
there is no UV‐C radiation leakage otherwise harmful.
The appliance is capable of processing a flow rate of 120
m3/h. Approximately 3 hours after installation, it reaches
90% airborne bacterial load elimination.
Fg.1
82 x 27 x 11 cm / 107 x 33 x 28 cm (H,L,P)
12,5 Kg / 15 kg
97 x 36 x 19cm (H,L,P)
105 x 34 x 29 cm (H,L,P)
230 V ~±10%
1
50 Hz
150 W
N. 2 F 2A (5X20) Position over the electrical
socket
7
ENGLISH