Answer The Waiting Call; Mute The Microphone; End A Call; Reject A Call - LUTEC BT77P Manual De Usuario

range of the hands-free Car Kit.
II-8-1-2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice dial by saying the name of the person on
the hands-free Car Kit. The call will be connected in a few seconds.
II-8-2 When using a mobile phone without Bluetooth built-in and requiring a Bluetooth dongle:
II-8-2-1 Press S1 on the hands-free Car Kit shortly
Notice: Make sure that the voice dialing function is properly set up in the Mobile phone and it is within the
range of the hands-free Car Kit.
II-8-2-2 Put through the call
After the beep tone on the hands-free Car Kit, you can make a voice dial and the call will be connected in a few
seconds.
II-9 Answer the waiting call
During the active call in session if another call is coming, press "Volume Down" for 2 seconds will make the
mobile phone switch to the waiting call and place the active call on hold. Press "Volume Down" for 2 seconds
again, mobile phone will come back to the first active call.
II-10 Mute the Microphone
II-10-1 To mute a microphone during an active call
Press S2 for about 2 seconds and a beep tone will indicate the microphone is muted. A periodic beep tone will
be heard while the mute function is active.
II-10-2 To un-mute a call
When the microphone is muted, press S2 for about 2 seconds. Then the mute function will end and the
periodic beep tone will stop.
II-11 End a Call
While a call is in session on the hands-free Car Kit, press S1 and you will disconnect the call. A long tone will
indicate that the call has ended. After the call is disconnected, the blue LED will flash normally.
II-12 Reject a Call
When the hands-free Car Kit is ringing, press S1 for 2 seconds, the ringing will stop and a long tone will
indicate that the call is rejected.
- 10 -