LUTEC BT77P Manual De Usuario página 14

A: Most Bluetooth mobile phones with enabled Bluetooth function can search for more than one Bluetooth
device within the operative range. The Car Kit will appear as "BT77P" (BT receiver) or "Unknown
Device" on your mobile phone after having been detected.
5. Why can't my mobile phone find the Car Kit?
A: If the Car Kit is not in pairing mode, your mobile phone won't be able to find the Car Kit. Enable the
pairing mode of the Car Kit before starting to search for it on your mobile phone. (Refer to the user
manual of your mobile phone for detailed instructions.)
6. Do I need to pair the Car Kit with my mobile phone every time I switch on one or both devices?
A: No. Once the pairing between the two devices is set up, they will remain paired even when one or both
devices are switched off.
7. During holding the button S1 to get in the pairing mode, the Car Kit turns off.
A: Please start the pairing mode when the Car Kit is off.
8. Why do I hear disturbing noise coming from the Car Kit?
The mobile phone must be in an area with sufficient signal strength. 2) The mobile phone must be within
the operative range. If the mobile phone receives only poor signals, you can't hear very well with the
Car Kit.
9. Insufficient audio level of the Car Kit.
A: Adjust the sound volume on your mobile phone, or press the S2 button to increase volume (resp. the
S3 button to reduce the volume), or check whether your mobile phone is within a reception area with
sufficient signal strength.
10. Why doesn't the Car Kit work properly anymore?
A: 1) It may be that the batteries of the Car Kit need to be recharged. If the charge level of the batteries is
low, the red LED indicator starts to flash and an audible warning signal sounds in intervals of
2 minutes.
2) Some Bluetooth mobile phones have problems with the Bluetooth feature. These phones may
occasionally – but not often – disable the Bluetooth function under unpredictable circumstances.
When this happens, please reset your mobile phone by removing the battery. (It is not necessary to
repeat pairing.)
Make sure that the latest version of phone firmware is installed. Check the website of your phone
manufacturer for new firmware.
11. How can I set the volume of the Car Kit?
A: Use the S2 button to increase the volume and the S3 button to decrease the volume.
12. With which button can I accept a call and with which button can I complete it?
A: Use the S1 button to either accept or complete the call.
13. Can I use the Car Kit for redialling a number?
A: Yes. You can use the S3 button for redialling, provided that your mobile phone supports this feature!
14. Can I use the Car Kit for voice dialling?
A: The Car Kit can also be used for voice-controlled dialling, provided that your phone supports this
feature. Refer to the user manual of your mobile phone for detailed information. Press shortly the
S1 button. Wait for the dial tone and say the name of the person you want to call. Press again the S1
button to cancel voice dialling. Refer to the user manual of your mobile phone for detailed information.
Voice dialling is not supported by compatible mobile phones from Nokia!
15. Can I also use the Car Kit for outgoing calls while having a call?
A: Yes. Use the functions "dialling with the phone keys" and "voice dialling", provided that your mobile
phone supports these features.
16. Do I need to repeat the pairing procedure for the Nokia 6310 phone every time I switch off Car Kit or mobile
phone?
A: Yes. In contrast to other mobile phones, you need to repeat pairing for the Nokia 6310!
- 14 -