Transport And Storage - I-Tech F3S2000 Manual Del Usuario

There are no special care instructions for transport. For storage, the equipment is protected up to the
following environmental conditions:
room temperature from +5 to + 40°C
relative humidity from 15 to 93%
for use
Instructions for using F3S2000 and F2S700
Follow the instructions in the User Manual supplied with the device in your possession.
Follow the Instructions given in the user manuals of the MAG700, MAG2000 series or the LaMagneto
family.
Cleaning the F3S2000 and F2S700
To clean the F3S2000 and F2S700 devices, it is recommended to disconnect the three/2 solenoid
applicator from the device before performing any operation. Clean the fabric with a cloth moistened
with simple water and neutral soap and wait for it to dry completely before reusing the three solenoid
applicator for a therapy session.
Information for disposal
The product is subject to the WEEE legislation (presence on the label of the symbol
relating to separate waste collection: to dispose of the product, use special areas equipped
for the collection of electronic material by contacting the competent authorities of your country
or the manufacturer directly.
Maintenance and Support
The device does not require any particular routine maintenance. Please contact the manufacturer to
provide for a check of the functionality of the device, every two years.
The manufacturer is the sole entity authorized to provide technical support for the F3S2000 applicator.
Should you need technical support, please contact:
I.A.C.E.R. Srl
Transport and
storage
Instructions
How to take care of
F3S2000
)
17