Battery Installation - OHAUS HH 120D Manual De Operación

All manuals and user guides at all-guides.com

Battery Installation

Two AAA size alkaline batteries are provided.
CAUTION: Keep the protective cover in place while installing batteries.
• Remove the battery cover on the bottom of the scale and place the
two "AAA" size alkaline batteries into the compartment as indicated.
• Do not use excessive force or press the weighing pan.
• Re-insert the battery cover.
General Product Features
• Power Up Test: When the scale is turned on, all display segments will
appear for approximately 3 seconds before resetting to zero.
• Stable Reading Indication: On the display, a star indicator will appear in
the lower left corner of the display when a stable reading has been
reached.
• Overload: If the applied load exceeds the capacity of the scale, an E
will appear on the display and the load should be removed immediately.
The scale will return to normal operation.
• Zero Function: Values can progressively be added to a sample. By
pressing the On/Off Zero button, the scale display returns to zero. After
adding additional mass, press On/Off Zero to zero the scale again.
Additional mass may be added up to the capacity of the scale.
• Negative Value: When a load is removed from the scale, any zeroed
value will be displayed as a negative number. To return to normal
operation, the zeroed value can be cancelled by pressing On/Off Zero.
• Auto Shut-Off: To extend battery life, the scale will automatically turn off
after approximately five minutes if no active weighing is occurring.
2
TEXT.pmd
+
2
g
3/23/2005, 10:04 AM