Selection Of The Installing Position; Indoor Unit; Outdoor Unit - Kentatsu KSGRE26HZAN1 Manual De Instalación Y Funcionamiento

SELECTION OF THE INSTALLING POSITION

Indoor Unit

 There is no heating and steaming source nearby.
 No obstacles for installing position nearly.
 Keep good air circulation.
 Convenient to adopt measures to reduce noises.
 Do not install them near the doorway.
 Make sure to have the distance between the ceiling, wall,
furniture and other obstacles.
 2 meters high above the fl oor.

Outdoor Unit

 In case that you put up a canopy to protect it from rains and sunrays, pay attention not
to cause any obstacles for the heating dispersion for the condenser.
 Do not grow animals or plants near the installation location for the cold and hot air out
will aff ect them.
 Make sure to have the distance specifi ed in the picture between ceiling, wall, furniture
and other obstacles.
 Stay away from heating source and infl ammable air.
 The installation base and supporting frame should be strong and secure. The machine
should be at plane surface.
The distance between indoor and outdoor unit should be 5 meters and pipe length can go up to maximum 15 meters with additional refrig-
erant charge.
Max. Allowable Tubing
Limit of Tubing Length(m)
Length at Shipment(m)
5 15
Above
15cm
Requires Amount of Additional
Limit of Elevation Di er- Refrigerant (g/m)
ence H(m)
CC≤12000Btu
5 20
9
Above
15cm
CC≥18000Btu
30