Publicidad
Idiomas disponibles
Idiomas disponibles
1- USB Media Port:
You can connect external USB media to this port, like for example USB sticks or external
USB hard disks. Supported formats are MP3 and WAV. The maximum file limitaion is 341
MB or 233 minutes per track. Encoding with 32, 44.1 and 48 kHz are supported for Mp3
format only. The medium must be formated as FAT system. A maximum of 999 folders with
999 tracks each is readable.
2- Source Select Button:
Via the Source Select Button it is possible to switch between the three media modes. When
turning on, the device will automatically be in USB1 mode. Push the Source Select Button
when in pause mode in order to change to USB2. Hold the Source Select Button for
approximately 2 seconds in order to switch to MIDI mode.
3- BRAKE, START DIAL:
BRAKE DIAL
a. When in the VINYL mode, this BRAKE dial determines the deceleration speed until
play stops when the jog wheel is hold down.
b. When in the CDJ mode, this BRAKE dial determines the deceleration speed until play
stops when the PLAY/PAUSE button is pressed.
c. When the BRAKE dial is rotated to MIN, play stops quickly; when the dial is rotated to
MAX, play stops more slowly before coming to a complete stop.
START DIAL
a. When in the VINYL mode, this START dial determines the acceleration speed until full
playback speed is reached when the jog dial is backspin.
b. When in the CDJ mode, this START dial determines the acceleration speed until full
playback speed is reached when the PLAY/PAUSE button is pressed.
c. When the START dial is rotated to MIN, play starts quickly; when the dial is rotated to
MAX, play starts slowly before full playback speed.
4- TEMPO RANGE BUTTON:
Press the button to choose any pitch percentage of 6%, 10%, 16%, and 100%.
With this button you can also switch Pitch Slider on/off by pressing it for at least 1 sec.
5- KEY LOCK:
This button activates the KEY LOCK function. This function allows you to use the PITCH
SLIDER to speed up or slow down playback speed without altering the tonal pitch of the
track.
6- TOGGLE BUTTON (WHEEL MODE):
Each press the TOGGLE button to select the WHEEL MODE of VINYL/CDJ/A CUE
SCRATCH.
a. VINYL - When wheel mode is set to VINYL, use the JOG WHEEL to activate the scratch
effect by touching the surface of Jog Wheel.
b. CDJ - When wheel mode is set to CDJ, scratch mode is exit, JOG WHEEL can be used to
pitch bend and frame search.
c. A.CUE SCRATCH
IN PLAYBACK MODE
While in play mode and when the touch sensitivity function is active, the JOG WHEEL can
be used to return the unit to last IN point.
Simply touch the JOG WHEEL and unit will immediately return to the last set CUE point
(BANK LED is not blinking) or BANK IN point (LED is blinking) and playback without
music interruption.
19
All manuals and user guides at all-guides.com
A- GENERAL FUNCTIONS AND CONTROLS
23
22
21
20
19
18
17
16
15
14
13
12
1
2
3
4
5
6
7
8
9
11
10
Publicidad
