Publicidad
Idiomas disponibles
Idiomas disponibles
5- SAMPLER
On SAMPLE mode the Bank buttons change function and allow for playback of stored
Samples at the same time with the normal Playback of your K2 player.
Procedure: first we have to store CUEs and/or Loops at the Bank buttons.
- Press SAMPLE to activate "SAMPLE/LOOP" mode. SAMPLE button lights, press it
again and it blinks. Press a third time and we exit "SAMPLE/LOOP" mode, button lights
OFF. With SAMPLE button light, pressing a Bank button will play the Sample
continuously. If SAMPLE button blinks, pressing a Bank button will play the Sample once
and stop.
- In "SAMPLE/LOOP" mode when playing a Sample it will add to the normal Playback of
your unit.
- Pressing SAMPLE button a second time we enter "SAMPLE SINGLE MODE". Samples
will play once and stop.
- Exit "SAMPLE MODE" pressing SAMPLE again.
Please, be aware that here we are talking about Samples that have a certain length in time.
Since at the Bank buttons we can store CUE points that have no time length they have to be
converted into Samples. This is done automatically by your unit using the CUE point as the
start point of a Loop. Hence we have a Sample.
"Samples" play continuously
6- EFECTS
Three effects parametrizable in time and ratio are avaialble. Time Parameter will determine
the change in sound and Ratio Parameter the amount of processed signal versus original
signal.
Following there is an explanation of the effects:
ECHO
This function allows a delay sound with beat of 1/4, 1/2, 3/4, 1/1, 2/1, 4/1 .
Original (4 beats)
The delayed signal will be repeated several times upon the setting of the Time parameter.
Time parameter can be set using the Jog Wheel or setting it in Beat values using the function
FX BEAT SYNC
All manuals and user guides at all-guides.com
D - STEP BY STEP FOR IMPORTANT OPERATION
"Samples" play only once and Stop
1/2 delay (8 beats)
FLANGER EFFECT
A"jet" like sound will be added to the music.
In units of 1/4, 1/2, 3/4, 1/1, 2/1, 4/1 beat;
One cycle of flanger effect is produced quickly and easily.
1 cycle = 1/4, 1/2, 3
/4,
1/1, 2/1, 4/1
Time parameter can be set using the Jog Wheel or setting it in Beat values using the function
FX BEAT SYNC.
FILTER EFFECT
Music tone can be dramatically changed with the Filter effect by removing a range of
frequencies.
1 cycle = 1/4, 1/2, 3
/4,
1/1, 2/1, 4/1
Time parameter can be set using the Jog Wheel or setting it in Beat values using the function
FX BEAT SYNC.
EFFECT PARAMETERS SETTING
There are two ways of setting the effecs parameters:
-
Manually using the Jog Wheel
-
Automatically using the FX SYNC mode
HOLD BUTTON
This button allows you to set and lock any new parameters you set to the effects. This button
will glow when the hold function is activated. If the hold function is not selected any
changes to the effect parameters will be momentary.
The original value can be independently defined. For this, activate the Hold function (27)
and set the desired valued. When deactivating the Hold function and changing the
Frequency/Intensity value, the value will automatically jump to the defined original value.
Short delay
beat
Frequency
beat
28
Publicidad
