Akiyama K2 Manual Del Usuario página 22

16- CUE BUTTON:
A Cue Point is a self-defined starting point, usually at the beginning of a beat. When
activating the Cue Button (16) the Player interrupts playing the track and returns to the last
set Cue Point. To set a Cue Point, follow either of the following two options:
a) Search the desired Cue Point using the Jog Wheel (8) while in Pause mode. You will
access the Frame Search mode (fragmented repeats =1/75 minute) and can precisely set
your Cue Points. Then press the Play/Pause Button (15) to save the Cue Point. The player
returns to Play mode.
b) While in Play mode, press the Loop In Button (26) at the desired point to save the Cue
Point. The player remains in Play mode. With a little practice, this is a faster way to set the
desired Cue Point. Press the Cue Button (16) for the player to return to the Cue Point and go
into Pause mode. By pressing and holding the Cue Button you will return to Play mode until
you release the button again. The player will then return to the Cue Point and go into Pause
mode. Press the Play/Pause Button (15) to permanently return to Play mode.
NOTE: When pressing the Cue Button (16) while in Play mode when no Cue Point has been
set, the player returns to the start of the track and goes into Pause mode (Auto-Cue). The
player saves the Cue Point which can be prompted with the Cue Button for a single track
only. When changing to another track, the previous Cue Point will no longer be saved.
17- CUE PLAY BUTTON:
Press the button to return to the last CUE point and resume playback immediately. You can
also tap the button to create a BOP effect.
18- SEARCH BUTTONS:
This search button allows you to quickly scan backwards through a track.
This search button allows you to quickly scan forwards through a track.
19- NEXT TRACK BUTTON:
While either playing a track or in pause mode, press this button to search for the next track
you want to play. NEXT TRACK indicators will flash. Now you can turn the FOLDER or
TRACK knob to search for the next track. Press the PRESET button you found your desired
track.
20- TRACK KNOB:
This knob has three functions.
a- The knob is used to select a track. Turning track knob will forward/backward skip to
next track.
b- Holding down and turning track knob will rapidly forward/backward skip through the
tracks by 10 tracks per click.
c- Press track knob to switch file name/title (ID3)/artist (ID3)/Album(ID3)/Genre(ID3) on
the VFD.
21- REVERSE KNOB:
Activate Reverse function to play the track or sampler in reverse. Press the button again to
deactivate this effect.
22- FOLDER KNOB:
Turn FOLDER knob to search the desired folder.
23- PLAYLIST BUTTON (only MIDI):
This button will automatically lock on the Playlist function of your DJ Software.
21
All manuals and user guides at all-guides.com
A- GENERAL FUNCTIONS AND CONTROLS
24- RELOOP BUTTON:
If a SEAMLESS LOOP has been made, but the player is not actively in seamless loop
mode, pressing the reloop button will instantly reactivate the seamless loop mode. To exit
loop, press the out button. RELOOP will appear in the VFD display when the RELOOP
function is available.
In the loop mode, hold RELOOP button, LED of IN/OUT/RELOOP will flash and "OUT
EDIT" will be indicated on the VFD, now you can turn the J.W. to edit out point; then press
the RELOOP button again to exit editing.
Note: Please DO NOT touch the sensitive JOG Wheel under A. Cue Scratch mode.
25- OUT BUTTON:
This button is used to set the ending point of a loop. A loop is started by pressing the IN
button, pressing the OUT button set the loop ending point. The loop will continue to play
until the OUT button is pressed once again. (● EXIT).
26- IN BUTTON:
This function allows you to set a CUE POINT without music interruption. This button also
sets the starting point of a seamless loop.
27- EFFECTS AND HOLD BUTTON:
HOLD BUTTON - This button allows you to set and lock any new parameters you set to the
effects. This button will glow when the hold function is activated. If the hold function is not
selected any changes to the effect parameters will be momentary.
PARAMETER TIME BUTTON - This button is used to adjust the parameter time value.
You can also push the TIME knob, LED on, and turn the JOG WHEEL to adjust the
parameter time value.
1. If the hold function is not selected any changes to the effect parameters will be
momentary.
2. During hold function is selected the auto beat sync will be turned off.
ECHO EFFECT - This button is used to activate and deactivate the echo effect. The echo
effect adds an echo to your output signal.
FLANGER EFFECT - This button is used to activate and deactivate the flanger effect. The
flanger effect distorts the output signal and creates an effect similar to the frequency
phasing in and out of each other.
29 30
28
27 26 25
31 32
24