Invacare HomeFill II Manual De Operación página 26

5. When the cylinder fillport is disconnected from the
connector fillport, release the outer ring (sleeve) of the
connector fillport and use both hands to remove the
cylinder from the compressor cradle.
The fillport cover on the connector fillport and the
cylinder fillport MUST be replaced after filling and when
not in use. If either of the fillport covers are missing
contact your healthcare provider before using.
6. Place the fillport covers onto the connector fillport and
cylinder fillport.
7. Examine the cylinder gauge to ensure the cylinder is full
(needle pointing into GREEN area). If the cylinder is not
full, perform the following:
• Repeat Connecting the Cylinder to the Compressor on
page 22.
• If the cylinder is not full after a second attempt to fill it,
contact the provider.
Cylinder Fillport Cover
HomeFill II Compressor
®
WARNING
FIGURE 4.4 Fillport Covers
Connector Fillport Cover
26 Part No 1145805