Dust Extraction; Mounting The Splinterguard; Operation; Switching The Machine On And Off - Festool TS 75 EQ Manual De Instrucciones Original

6.5
6.6
6.7
6.8
8.6

Dust extraction

WARNING
Health hazard posed by dust
► Always work with an extractor.
► Comply with national regulations.
► Wear a dust mask.
A Festool mobile dust extractor with an extrac­
tor hose diameter of 1-1/16" (27 mm) or 1-7/16"
(36 mm) (36 mm recommended due to the re­
duced risk of clogging) can be connected to the
extractor connector [9.1].
9.1
8.7

Mounting the splinterguard

The splinterguard (accessories) significantly
improves the quality of the cutting edge of the
sawn workpiece on the upper side for 0° cuts.
► Attach splinterguard [10.1] onto the protec­
tive cover,
► Place machine onto the workpiece or the
guide rail,
► Press splinterguard down until it sits on the
workpiece and tighten it with the rotary
knob [10.2].
► Saw splinterguard in (machine to maximum
cutting depth and speed range 6).
All manuals and user guides at all-guides.com
10.1
10.2
WARNING
Risc of injury
When making mitre cuts, the splinterguard
raises the portable circular saw from the
workpiece, which can lead to serious inju­
ries.
► Use the splinterguard only for 0° cuts. Al­
ways remove the splinterguard for mitre
cuts.
9

Operation

Read and understand the safety instruc­
tions before starting work!
9.1

Switching the machine on and off

Keep the machine steady during
switching and during use by holding the han­
dle [11.2] and the additional handle [11.1] with
both hands
To switch on, first push the cut-in and release
block [11.4] forwards, and then press the „On"-
"Off" switch [11.3]. You can then press the ma­
chines down for sawing, and release the cut-in
and release block.
To switch off, release the „On"-"Off" switch.
English
11