Safety And Installation Instructions - Waeco MagicWatch MWE910 Instrucciones De Montaje Y De Uso

All manuals and user guides at all-guides.com
MagicWatch MWE910
1

Safety and installation instructions

See fig. 1
The following texts only complete the figures on the supplementary
sheet. They do not contain the full installation and operating instruc-
tions. Please observe the figures on the supplementary sheet.
Please observe the prescribed safety instructions and stipulations
from the vehicle manufacturer and service workshops.
The manufacturer will not be held liable for claims for damage resulting from
the following:
Damage to the appliance resulting from mechanical influences and
excess voltage
Alterations to the device without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
Installing the parking aid can cause problems on vehicles with
a
LED tail lights.
If you would like to install the sensors on metal bumpers, you re-
quire suitable adapters (not included in the scope of delivery).
Observe the applicable legal regulations.
Do not expose the control electronics to dampness.
Secure the parts of the parking aid installed in the vehicle in
such a way that they cannot become loose under any circum-
stances (sudden braking, accidents) and cause injuries to the
occupants of the vehicle.
Do not fit the parts of the parking aid installed where an airbag
may open. This could cause injury if the airbag opens.
The sensors may not cover signal lamps.
When fitting the sensors, make sure there are no objects fixed
to the vehicle (such as a bicycle rack) that are in the detection
range of the sensors.
The parking aid is intended as an additional aid, which means it
does not relieve you of the obligation to take due care when
manoeuvring.
Safety and installation instructions
15