Auboueix IDRA 2 Manual Del Usuario página 18

nents, with the exception of changes or removals recom-
mended by the helmet manufacturer.
• In no event shall the helmet be adapted for mounting acces-
sories using a method not expressly recommended by the
helmet manufacturer.
• Do not apply paints, solvents, adhesives or adhesive labels,
except those recommended in the helmet manufacturer's
instructions (see markings and stickers).
• Instructions for use, storage, and cleaning must be strictly
observed to prevent loss of protection through ageing or
reduction in insulation efficacy.
• The user must check that the electrical protection limits of the
helmet correspond to the nominal voltage likely to be encoun-
tered during use.
• Insulating helmets must not be used in situations where its
insulating properties may be partially affected.
• The helmet cannot be used alone; it is necessary to use
other insulating safety equipment according to the risks
inherent to the work at hand.
• Storage: in the original bag after each use, at a temperature
between 5 ° C and 35 ° C, protected from light (UV), heat, and
weather. Do not place the helmet behind a windowpane, a
windshield, or the rear window of a vehicle.
• Maintenance: Wash exclusively with soap and water.
Explanation of markings and symbols present on the back
and inside the helmet
• EN 397 : European standard for industrial helmets
• ABS : Helmet material
• OBX : Mark of the manufacturer Auboueix SA
• 18 : Year of manufacture (2018) indicating the quarter (circle)
• 22 : Year of usage limit (2022) indicating the quarter (circle)
The helmet is compliant with the optional requirements of the
- 30° C
European standard for shock and -30° C penetration tests.
The helmet is compliant with the optional requirements of
440 V~
the European standard for electrical insulation tests on the
non-vented models (EBT).
The safety helmet protects the wearer against electrical shock by
preventing the passage of a dangerous current to the body through
the head, according to the European standard EN 50365.
• classe 0 : Helmet class, according to the European standard
Lot number.
The helmet complies with EU regulation EU 2016/425.
• 2754 : Number of the notified body (ALIENOR CERTIFICATION)
18
EN 50365.