Important Recommendations - Auboueix IDRA 2 Manual Del Usuario

Accessories, spare parts
Name label, red headband for work supervisor, harness (cap +
headband + napestrap), headband with adjustable napestrap,
headband lining, IDRA 2 shield, chinstrap.
Helmet marking
Upon request, helmets can be marked with the company logo.
The method used is thermal transfer marking with one or more
colours (gradient colour not supported).
Marking dimensions: L 60 x H 40 mm in the front.
Stickers
It is possible to add a sticker on the front, side or back of the
helmet with the exception of the upper part of the helmet.
YOU MUST PROTECT YOUR VIEW.
EYE DAMAGE IS IRREVERSIBLE.
Designed to protect the user against electric arc short circuits
in low-voltage electricity in accordance with standard
EN 166, the IDRA 2 shield was tested against high-speed parti-
cles, molten metal, hot solids and liquid splashes according to
standard EN 166. The shield has received an anti-fogging treat-
ment on the inside and an anti-scratch treatment on the outside.
The shield is optical class 1 hence permanent use is allowed.

IMPORTANT RECOMMENDATIONS

The shield must be exclusively mounted on IDRA 2 safety
helmets.
• Shield care: the shield must be cleaned daily with warm water
and soap using a non-abrasive cloth to maintain the integrity of
surface treatments (anti-fogging inside, anti-scratch outside).
• Disinfection: if necessary, use isopropyl alcohol.
• The shield can be damaged by certain chemicals. Do
not use aggressive chemicals such as solvents or deter-
gents. For more information on this matter, contact the helmet
IDRA 2 shield
EN 166
EN 170
Polycarbonate
face shield
Limit of use: 48 months
Dimensions: 330 X 200 mm
Thickness: 2.2 mm
Shield weight: 150 g
19