Getting Started - Explore Scientific RDC1005 Manual De Instrucciones

GETTING STARTED

INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please
ensure the polarities (+/-) of the batteries
match upon installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
or when the display is dim.
CLOCK
CLOCK RECEPTION
1. Replace batteries or press [
will initiate RCC receiving.
2. RCC receiving can work in both date mode
and alarm mode.
3. The receiving process duration is 7 minutes.
4. During receiving process, the RCC signal
symbol [
5. If the RCC receiving process is successful, a
completed RCC symbol [
in the display and the date and time will be
set automatically. If it fails within 7 minutes,
RCC setting will quit automatically. If that
happens, press [
RCC receiving.
] displays, 6. RCC receiving will automatically start at 2:03,
3:03, 4:03, 5:03 every night. Auto receiving
function will cease if it is successful.
7. To stop RCC reception, press the [
button.
8. If the device is still not receiving the signal,
] button please proceed to set the time manually.
SET THE CLOCK MANUALLY
1. Press and hold [
time and date setting.
] will be shown
] button to re-initiate
]
] button to enter
7
EN
IT
DE
FR
ES
NL