Getting Started - Explore Scientific RDC1004 Manual De Instrucciones

GETTING STARTED

INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 3x AAA (LR03)/1.5V batteries. Please
ensure the polarities (+/-) of the batteries
match upon installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
or when the display is dim.
CLOCK
CLOCK RECEPTION
1. When you insert or replace the batteries, RCC
reception is initiated. To manually start RCC
reception press and hold [DOWN] button.
2. The receiving process duration is 7 minutes.
3. During receiving process, the RCC signal
8
symbol [
4. If the RCC receiving process is successful, a
completed RCC symbol [
in the display and the date and time will be
set automatically. If it fails within 7 minutes,
RCC setting will quit automatically. If that
happens, press and hold [DOWN] button to
re-initiate RCC receiving.
5. No other button will work during RCC recep-
] displays, tion. Press and hold the [DOWN] button to
stop reception and the other buttons will
return to normal operation.
6. If the device is still not receiving the signal,
please proceed to set the time manually.
SET THE CLOCK MANUALLY
1. If [
active. Press and hold [DOWN] button to de-
activate RCC reception.
2. Press and hold [SET] button to enter time
] flashes.
] is flashing, then RCC reception is
] will be shown