Whale Supersub SS5012 Manual Del Usuario página 4

4
EN
Figure 1. Installation Recommendations
30⁰ maximum
Figure 2. Fitting Instructions
Step 1
B
Step 4
NOTE: Do NOT screw directly onto the hull
For Manual Pump Models
Screws supplied with retail
models only
Push
Figure 3. Advantage of Using Mounting Wedge Part When Retrofitting In Place Of Competitor Pumps (Supersub Smart only)
Figure 4. Typical Installation
Power boat
Munster Simms Engineering Ltd, 2 Enterprise Road, Bangor, Co Down, N. Ireland BT19 7TA
Tel: +44 (0)28 9127 0531 Web: www.whalepumps.com Email info@whalepumps.com
All manuals and user guides at all-guides.com
For optimum results use the wedge (supplied with automatic pumps)
o
8
Step 2
A
Choose
position
A or B Twist
2
Pull
Screw
Twist
Multiple hole
options to retrofit in
place of competitor
pumps
Under cockpit
Mounting wedge
Step 3
1
For Automatic Pumps Models
Screws supplied with retail
models only
Push
Shallow bilge
Narrow bilge
Supersub
Range
Note correct
fitting - Both
circled arrows
should point in
the same
direction.
If supplied, fit wedge to suit chosen position
(product is shipped in position B)
Screw
Twist
1
8mm ( 5 / ")
16
(not included) for
securing diffuser
housing to wedge
without affecting
mounting surface
Sail boat
Side
mounting