Tabla De Contenido; Introduction; Safety Symbol And Signal Word Review - LiftMaster DDO8900W Manual Del Usuario

Table of Contents
Introduction
Safety Symbol and Signal Word Review ...2
Planning ....................................................3
Preparing Your Door .................................4
Tools Needed ............................................4
Carton Inventory .......................................5
Hardware ..................................................5
Additional Items You May Need ................5
Terminal Block Wiring Layout ...................5
Assembly
Attach the Collar to the Door Operator ......6
Attach Mounting Bracket to
Door Operator ...........................................7
Installation
Position and Mount the Door Operator .....8
Attach the Emergency release ...................9
Install the Automatic Door
Lock (Not Provided) ..................................9

Introduction

Safety Symbol and Signal Word Review

This door operator has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict
accordance with the instructions and warnings contained in this manual.
When you see these Safety Symbols and Signal Words on the following pages, they
will alert you to the possibility of serious injury or death if you do not comply with the
warnings that accompany them. The hazard may come from something mechanical or
from electric shock. Read the warnings carefully.
When you see this Signal Word on the following pages, it will alert you to the possibility
of damage to your door and/or the door operator if you do not comply with the cautionary
statements that accompany it. Read them carefully.
WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer
or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Attach the Cable Tension Monitor
2
(Required) ...............................................10
Install the Three Button
Control Station ........................................11
Install the Protector System ....................12
Install the Light Curtain (Not Provided) ...15
Connect Power ........................................16
Install the Battery
Backup (Not Provided) ............................18
Install the LMi5 (Not Provided) ...............19
6
Adjustments
Program the Travel .................................20
Automatic Force Setup ............................20
Test the Safety Reversal System .............21
7
Test the Protector System .......................21
Test Cable Tension Monitor ....................22
Test Automatic Door Lock .......................22
To Open the Door Manually ....................22
Operation
2
Using Your Door Operator ......................24
Programming
Remote Control (Not Provided) ...............25
To Erase the Memory ..............................25
Activating Timer-To-Close (TTC) .............26
Maintenance
Care of Your Door Operator ....................26
Troubleshooting
Diagnostic Chart .....................................27
20
Additional Troubleshooting .....................28
Repair Parts
Installation Parts .....................................30
Door Operator Parts ................................30
Accessories
Contact Information
23
Mechanical
Electrical
25
26
27
30
31
31