Troubleshooting; Service Data - AEG BEE431011M Manual De Instrucciones

Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1 Turn the glass cover to remove it.
Step 2 Clean the glass cover.
Step 3 Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4 Install the glass cover.

13. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
13.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not heat
up.

13.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
20 ENGLISH
Before you replace the lamp:
Disconnect the oven from the
Check if...
The fuse is blown.
Step 2
Put a cloth on the bottom of the cav‐
mains.
Problem
The door gasket is dam‐
aged.
The display shows
"12.00".
The lamp does not work.
.........................................
.........................................
.........................................
Step 3
ity.
Check if...
Do not use the oven.
Contact an Authorised
Service Centre.
There was a power cut.
Set the time of day.
The lamp is burnt out.